Education lamp manufacturers share how to maintain classroom lamps and blackboard lamps

The standard requires that the classroom lights should be arranged perpendicular to the blackboard, and the blackboard lights should be arranged parallel to the blackboard. Knowing the national standard, we conduct the layout through professional software simulation. Before the simulation, we need to determine the length, width and height of the classroom. With these parameters can be simulated.

The arrangement of lamps and lanterns can be followed in a regular manner, which provides convenience for the design of educational lamp manufacturers and guarantees the quality of lighting design, but it is based on the following two conditions:

1) Blackboard lights and desk lights form a continuous light band:

2) Using the pipe hanging installation method.

2. Arrangement rules: .The blackboard lights should be arranged parallel to the blackboard, and the desk lights should be arranged perpendicular to the blackboard. Please refer to Table 2 for the relevant arrangement dimensions. In special cases, the illumination calculation shall prevail. For example

For example, the illumination standard of the art classroom is 5001x, and the spacing of the light strips may be adjusted to 1.8-2 meters.

3. The installation height of lamps and lanterns is generally 2.5-2.7 meters, and the height of blackboard lamps and desk lamps is the same. In special cases, for example, when a lifting blackboard is used, the installation height of blackboard lamps can be 3=3.5

The classroom is the main place for students to study, and it is the place where students stay for a long time. If the classroom lighting is not done well, it will cause the problem of myopia among teenagers. Therefore, classroom lighting has become a new battlefield for myopia prevention and control! The classroom eye protection lamp we developed and produced Strictly control the color temperature, glare, blue light, illuminance and other issues in educational lighting to avoid harm to students' vision health caused by bad lighting! The evaluation index of color) is inseparably related: when the color temperature is lower than 3000K, the light is soft, and it is difficult for students to concentrate. The color temperature is higher than 6000K, and the light is white and easy to be excited and tired. Studies have shown that the color temperature of 3300K-5500K is more suitable for learning, which is more effective for teachers and students.