Ideas when designing solar street lights

(1) Stability guarantee: stable and reliable operation, and can be used around the clock under unattended conditions. (2) No electromagnetic interference: the wind turbine and its charging controller will not have harmful electromagnetic effects on the surrounding environment. (3) Product quality assurance: the design, manufacture, product quality implementation of wind turbines and relevant industry standards, and the product quality assurance system conforms to the target regulations. (4) Utilize wind energy and solar energy renewable energy to ensure uninterrupted power supply all year round. (5) Applicable environmental working conditions: temperature -15~45C relative humidity 95%; rain and coastal salt spray; wind speed 330m/S; instantaneous wind speed 40m/S; total solar radiation 150kca/cm2; annual sunshine 3000h . In addition to the general led solar street lights, the solar panels and light sources can be directly placed on the poles for normal lighting to achieve the purpose of lighting. However, problems will also be encountered during the installation of led solar street lights. The relevant design will be detailed below. Explanation: Centralized power supply led solar street lights For the installation of led solar street lights or solar panels in shaded areas, a centralized power supply method can be used for the lamps, that is, the solar panels required by all solar LED light sources are concentrated on the roof or open space. As long as it does not affect the lighting, it will be installed on the solar panel bracket, and then the system will supply power to each street light. ----Solar street light manufacturers

Mains switching led solar street lights LED solar street lights installed in the factory: Since the installation location of the street lights has been determined, but there are buildings around it, and at the same time, the street lights must be turned on at the same time in the solar street light wholesale factory. In the case of lighting, the independent led solar street light obviously cannot meet the requirements of the system. In response to this situation, the solar power grid complementary system + centralized power supply method can be used, the solar panels are installed on the roof, and the entire street light system can be controlled centrally, which can be lit at the same time. When the solar power supply is insufficient, it can be Supplement with utility power. ----Solar street light manufacturers